House painting in Auckland, inside and out.
House painting in Auckland means matching the coating system to the surface: bare timber needs priming the same day it is exposed, plaster needs cracks filled before the first coat, and older villas often carry several layers of pre-1980s paint that should never be dry sanded. A proper quote follows a look at the actual surface, not a square-metre guess.
99.5%from 10 authenticated NoCowboys ratings
What's included.
One crew handles interior and exterior painting across Auckland, from preparation and small repairs to the final coat and clean-up. We look at the surface first, agree the preparation it needs, then price the job as a whole.
Interior walls, ceilings, doors and trim.
Exterior walls, weatherboards and painted details.
Surface preparation and minor repairs connected to the paint finish.
Refresh work that sits alongside property maintenance or a small renovation.
From first message to finished.
- 1
Show us the job
Send a few photos or book a visit. Older homes and high walls usually need a look in person.
- 2
Agree the prep
We set out the preparation, coats and finish before the price, including how old paint comes off safely on a pre-1980s home.
- 3
We paint and tidy up
Protection, prep, painting and clean-up are planned around your home and any other trades on site.
Get a free quote
Text or call Dan. He usually replies the same day.
Or email info@secondtonone.co.nz
Good to know.
Can photos be used for an early estimate?
Photos can help explain the size and type of job. We will confirm whether the condition, access or preparation makes a site visit necessary before a reliable scope is agreed.
What affects a painting quote?
Area, access, surface condition, preparation, coating system and the amount of detailed trim all change the work involved. A clear scope matters more than a single rate.
Can painting be coordinated with repair work?
Yes, where the required carpentry, maintenance or finishing work is within the agreed service scope. Raise connected issues at the first conversation so they can be considered together.
Is my house likely to have lead paint?
WorkSafe NZ presumes any home built in the 1980s or earlier has lead-based paint in at least one layer. That does not stop a repaint, but it changes how old paint is removed. We plan for it rather than dry sand and hope.
Does a colour change cost more?
Often a little, because a strong colour change or a first coat over bare timber usually needs an extra coat to cover evenly. It is a factor we discuss once the surface and current colour are known.
What changes the price?
- Age of the existing paint
- Homes built before 1980 are presumed by WorkSafe NZ to carry lead-based paint. That paint has to be wet-scraped or contained rather than dry-sanded, which changes the time and method needed to prepare the surface.
- Cladding material
- Weatherboard, plaster and fibre-cement each fail differently and need different preparation: bare timber needs priming the same day it is exposed, hairline cracks in plaster need filling before coating, and fibre-cement joints need their own sealant and sanding sequence.
- Surface condition
- A sound, previously well-maintained surface needs a wash and a light sand. Peeling, chalking or moss-affected paint needs scraping, fungicidal treatment or spot priming before a topcoat will hold.
- Access and height
- Two-storey weatherboard, steep sites and awkward gable ends change what access equipment is needed, which affects labour time independent of the wall area.
- Number of coats and colour change
- A dark-to-light colour change or a first coat over bare or badly weathered timber usually needs an extra coat to get an even, opaque finish.
Anything different about Auckland homes?
- Older villas and bungalows
- Many Auckland villas and bungalows were built with subfloors close to the ground and little cross-ventilation, which BRANZ notes keeps damp air trapped underneath the house. That moisture works its way into weatherboard from behind, which is a common reason paint lifts at the base of a wall even when the visible surface looks fine.
- Pre-1980s paint layers
- WorkSafe NZ presumes any building from the 1980s or earlier contains lead-based paint somewhere in its coating history. On these properties we plan preparation around wet methods and containment rather than dry sanding, which is the approach WorkSafe describes as spreading lead dust well beyond the immediate work area.
- The Auckland painting season
- Auckland's rainfall is weighted toward winter, so exterior work is easier to schedule in the drier, warmer months. A short window of fine days is still workable for smaller jobs, but a full repaint benefits from being planned around a longer settled stretch.
- South-facing and shaded walls
- Walls that stay damp longer, typically the more shaded elevations of a property, are the ones most likely to need a fungicidal wash before painting rather than a standard clean, because mould and moss regrowth under a new coat is what causes early, visible failure.